Well, I have not had any problems. This product works as advertised. Video freezes up occasionally but recovers quickly. I did move my router inside the house and went from -61 to -48. Camera resolution is acceptable and the IR emitters work well up to about 20 feet at night. Customer service is good (at least the one time I called them). I recommend this product. ADT installed our system and stand behind their work.
That all changed when smart home technologies and devices came into play. The landscape of how home security systems behave and how they are used continues to evolve. For instance, you no longer need the help of a professional installer, as most smart home security systems are easy to set up and monitor. Most can be fully functional in a matter of minutes.
How far away would the two doors be from an available Ethernet outlet? My thought is that you could use a system where the cameras actually talk to the base station, not the internet. Arlo, for example, uses cameras that talk to the base station directly. When the base station is plugged into Ethernet, it creates its own WiFi network which the cameras connect to directly versus connecting to your home network. The hard part would be that the base station needs to be in a central location between the two doors and, as I stated, connected using Ethernet. In a perfect world, you can place the Arlo cameras up to 300 feet away from the base station, but lots of things can obstruct their ability to talk to the base like walls and doors.
For a long time, I used my indoor Nest Cam to film through my window. It was a makeshift outdoor camera supplemented by my Ring Video Doorbell. So it should come as no surprise that when Nest Cam Outdoor launched, I jumped at the opportunity to buy it. Since then, my search for an outdoor solution has continued to Canary Flex, Ring Spotlight Cam, Arlo Pro, Arlo Pro 2, Blink XT, Nest Hello, Reolink Argus, Argus 2, and a few that did not make the honorable mention list.
Download the Ring app (available for both iOS and Android) and connect the Alarm with your existing Ring devices, or, if this is your first Ring product, follow the instructions and advice on how to get started. Both the app and written materials in the box provides helpful suggestions on how and where to set up your motion sensors and contact sensors.
The Nest Aware 5 day is $50 per year. If you add a second camera, it would be $75 per year for both so the difference isn’t as vast since you get 50% off subsequent subscriptions. My suggestion is that you dig in deeper as there are pros and cons to both so pick the one which has features that best align with your goals. A couple of bonus tips, which you may already know…1. I’ve owned both combos (Ring + a Nest Thermostat) and (Nest Hello + Nest Thermostat). To me, the only advantage is one app, and using two apps wasn’t a big deal IMO. If you use Nest’s Home Away/Assist, you might feel differently, but I don’t take advantage of that feature. 2. I’ve also tried Ring Spotlight and Ring Doorbell together. Again, the only advantage is that you will have one app. You can’t use them to trigger each other. For example, you can’t say, “When someone rings my doorbell, tell Spotlight to record.” I thought that was kind of interesting…
The Ring Alarm has the electronics required to do all of that now, and Harris said those features will be turned on at some point. “You’ll see all of those things,” he said. “We’ll support color-changing lights, so that in a smoke situation, the lights will turn to a darker color to make it easier to see at night. You’ll see door locks with [Z-Wave’s] S2 security that will disarm the security system when you use the keypad to unlock the door, because we know you’ve done that in a secure way.”
While setting the system up, my motion sensor got hung up and wouldn't stop detecting motion. I had to reset it, which I did through the app, but since it was part of the kit, the process was a little different than the app stated. This was a minor annoyance, but worth noting that if you ever run into an issue with any of the pieces that come with the kit, you'll need to do a full reset of that piece so that the base station can see it again.
You set up the Chime Pro, which also adds a chime sound to your motion detection alerts, in a process that’s similar to the camera installation: You plug it in to an AC outlet somewhere between your router and the camera to repeat the wireless signal. I used a spare outlet in my kitchen as that was roughly the halfway point between my living room router and the camera on the front of my house. Once the Chime Pro is plugged in, a voice prompt will tell you it’s ready to set up. You then add the device in the Ring app then follow the voice and app prompts to connect it to your wireless network.
The other thing of note is its lack of smart home partners. Despite being owned by Amazon, Ring's system doesn't work with Alexa or any other major smart home platforms. If you want to arm and otherwise get the status of your home security system via voice commands, the Ring Alarm Security Kit isn't the right option for you. Ring does specify in its support section that it's working on these integrations for a future release.
The Ring Alarm is controlled using the same mobile (Android and iOS) and web app as other Ring devices, such as the Ring Video Doorbell Pro, the Ring Floodlight Cam, and the Ring Spotlight Cam, but at the time of this review, the Alarm system does not interact with these (or any) Ring devices, nor can you pair it with just any Z-Wave or Zigbee device unless it is part of the Ring network, which is quite limited at this point.
Thanks, Abe. I have a chart that compares Canary and Flex here: https://homealarmreport.com/canary-flex-security-camera-review/. I still prefer Canary All-in-One over Flex. Of course, it’s an indoor only camera so that might be a dealbreaker for you depending on how you want to use it. It has a better picture, already offers two-way audio (if you’re a Canary Member), has motion zones, and multiple air quality sensors.
I’ve settled on continuous video for my outdoor cameras too. Obviously, I use Nest for that. For indoor cameras, Arlo Q is also an option. For $9.99/month, you can add continuous cloud recording. SpotCam also has continuous cloud recording, but we haven’t tried it. Of course, there are other options where you store the footage locally, but then the trouble becomes finding usable footage when you need it!
The one thing Apple fans might miss is HomeKit support, which isn't included in Ring Alarm and still has yet to come several other Ring products for which HomeKit support was promised long ago. Ring declined to offer any new details on its HomeKit plans, but acknowledged that customers continue to request it and promised the company is still working on it.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.