Like the hardware, Ring’s Protect Plus service is significantly less expensive than other options. It costs $10 per month and has no long term contract commitments. Nest offers a similar service, but it starts at $19.99 per month with a three-year contract and jumps to $29.99 per month if you opt for no commitment. ADT, one of the largest traditional home security services, has plans that start at $28.99 per month and requires a three-year commitment.
The keypad has 12 backlit buttons on the left-hand side and three in a circle on the right. You create a four-digit PIN during setup, which you’ll tap into the keypad when you arm and disarm the system (you can also do this from the Ring app, which is available for Android and iOS devices. It’s the same app used for Ring’s video doorbell and security cameras, although there’s currently little integration between the cameras and the security system.)
Where abode Wins: abode offers free cloud storage, and they offer the widest range of equipment including glass break and flood sensors which are viewed as essential home security devices. Also, abode uses an open platform allowing more third-party integrations via Z-Wave and Zigbee backed by their CUE automation engine. It’s true that Ring offers Z-Wave and Zigbee too, but details on compatible products are still scarce. Fourth, abode has more home security experience than Nest and Ring.
Standalone accessories can be added to your setup in a similar manner to those included in the base kit, although you'll have to scan a QR code on the back of them using the Ring app in order to get them to appear. From there, it's the same process of choosing the sensor type, naming it, assigning it to a room, and testing to make sure it's registering properly.
Ring's mission is to reduce crime in neighborhoods by creating a Ring of Security around homes and communities with its suite of home security products. The Ring product line, along with the Ring Neighbors app, enable Ring to offer affordable, complete, proactive home and neighborhood security in a way no other company has before. In fact, one Los Angeles neighborhood saw a 55 percent decrease in home break-ins after Ring Doorbells were installed on just ten percent of homes. Ring is an Amazon company. For more information, visit www.ring.com. With Ring, you’re always home.
My indoor Canary is self-sufficient, and that is exactly what I want in a home security camera. Flex has yet to provide that same experience. I’ve had to physically interact with the device multiple times to get it to reconnect to my internet. Also, the geofencing feature is inaccurate, often marking me away while home and vice versa. As for power loss notifications? They’re hit or miss.
While setting the system up, my motion sensor got hung up and wouldn't stop detecting motion. I had to reset it, which I did through the app, but since it was part of the kit, the process was a little different than the app stated. This was a minor annoyance, but worth noting that if you ever run into an issue with any of the pieces that come with the kit, you'll need to do a full reset of that piece so that the base station can see it again.
The second issue I have for the system is that there is no quick exit feature. For the entire six years that I've had a security system, I have been used to being able to press a button that will give me one minute to quietly exit the house. This is important when I am leaving for work a few hours before my family wakes up for their day. The Ring system doesn't have this feature at all. When the system is armed, it has to be disarmed (which it announces) and rearmed before exiting with a delay that can be set up with your phone (it will announce this as well and will make a sound while it counts down) or can be armed from your phone after you leave (again, it will announce this with the countdown sound). You either have to chose if you want the system to count down or not. Not counting down will immediately arm it and you will have to arm from your phone if you leave and arm it on the "Home" setting while others are still there. You can adjust the sound that is emitted from the panel so that it isn't loud, but it will also make your door and window chimes use the same volume all of the time. If you have your system armed while you’re home, and the volume is down, you might not hear the system telling you that it needs to be disarmed if you forget and open a door. There is no in-between here. If you have to leave while others are still sleeping, this may be a problem for you.
First, people have complained about the larger size of the door sensors and magnets. I didn't really think this was a problem until I tried to install them on my windows. The size of the sensor itself isn't really the issue. Its the size of the magnet. IF YOU HAVE DOUBLE HUNG WINDOWS, LISTEN UP!!! If you aren't sure what a double hung window is, it is a window in which both the top and bottom panes can be opened. You can slide the top pane down or the bottom pane up independently of each other. Why is this a problem? If you do not modify the magnets for the sensors, you will need to buy two sensors for each window that you have. With my last security system, the sensor was mounted to the bottom pane and the magnet was mounted to glass on the top pane. This was done so that if either pane was moved, the sensor would trip. With the Ring window sensors, the magnet is too big to place on the glass so that the bottom panel can be moved. If you try to open the bottom panel, the window will hit the magnet and knock it off, causing it to sit on the panel in front of the sensor and not trip it. Not all windows are made the same, so this may not be the case for you, but it is worth considering. The only way I have found to get around this is to order two sensors per window or to remove the magnet from the casing and attach it to the glass. The second option doesn't look aesthetically pleasing at all. If I figure out another way, I will update this review.
Motion detection was responsive and accurate with the default settings, which placed the sensitivity midway on a scale between “people only” and “all motion.” You can adjust this to your liking with the slider, or use it in combination with customizable motion zones. With each alert, Chime Pro simultaneously emitted a digital Ring. This ensured I was kept aware of detected activity even when I was home, as I don’t usually carry my phone around the house. You can change the chime’s sound and volume and “snooze” it for periods of time in the Ring app.
As of this writing, there are only a handful of add-on devices available that will work with the system, and for now, it doesn't support integrations with other Ring devices or third-party Z-Wave and Zigbee devices. That said, integration with Ring doorbells and cameras is on the way, and interoperability with third-party devices is also in the works.
Nest Indoor or Nest Outdoor? There are pros and cons to both. The Nest Cam Outdoor might be slightly more accurate, but that’s probably more to do with positioning – it has a better vantage point. The fact that it is more accurate, has sound, and night vision made me want to switch, but I could not deal with the way it looked once installed. In the end, Nest Hello provides CVR with the clean aesthetic that’s important to me.
As part of the Ring Protect Plus plan priced at $10 per month or $100 per year, you'll get 24/7 professional monitoring on your Ring Alarm. When your sensors trip and the base station sounds an alarm, after 30 seconds it also sends a signal to Ring's central monitoring system. A support agent will attempt to call you to see if everything is okay, and then tries your emergency contacts if you can't be reached.
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
There are so many home security systems to choose from; how can you possibly narrow it down and choose just one? There are obviously pros and cons to each system, so you need to think about what’s important to you and what you most value in a home security system. There really isn’t too much known about the Ring security system just yet because it’s very new on the market. The company has made themselves known for their video doorbells, but is just starting to dabble in home security systems. You’ve probably seen the videos of attempted burglars and package stealers caught red handed with Ring doorbells. Clearly, this innovative product has worked well so far. What should you keep in mind, though, when looking at the Ring Security System?
Hi Rose, I’m intrigued that you have a traditional alarm system but also one of these new wireless versions. Are they integrated? Can they be? I haven’t looked at the Ring, abode, and Nest systems because I have am old-fashioned standard system that came wired into my home. I’d love to integrate it with my Ring cameras and doorbell cam, or even get one of the new wireless voice-activated bases or keypads. Can that be done with any system today?
Ring, an Amazon company, also sells several security sensors. First is the keypad. The keypad runs on battery power, and you can wall mount it or place it on a flat surface. In addition to arming and disarming your system, the Keypad Control Panel allows you to choose between Armed Away and Armed Home. When using the keypad to arm your system, it provides a grace period to reduce false alarms. You can customize the grace period using the mobile app. Finally, you can simultaneously press and hold the check and x buttons for three seconds to trigger the panic alarm.
Ring Alarm supports a sensor bypass mode, which allows you to arm the system even if one of the sensors is currently tripped. For example, if you want to arm the alarm but leave a monitored window open, the system will notify you upon arming that one of the sensors is currently faulted. You can choose to close the window to clear the sensor or bypass it, which will arm the system but not monitor that sensor until the next disarm/arm cycle.
Would it be better than 1080p? Yes. Would it be good enough? I don’t know. I only tested the indoor IQ, not the outdoor. I didn’t think Supersight was that fabulous. Here’s a link to a section of my video that shows the Supersight in action (https://youtu.be/BIWchrX27fU?t=2m28s and also here https://youtu.be/BIWchrX27fU?t=56s). On the white table that’s on the right side of the frame, there are a few books stacked up. You can’t even read the titles on the bindings, but maybe a license plate would be different?
UPDATE 16FEB2018: After two weeks, I must downgrade my review... it's become obvious that the Ring Floodlight Cam only detects motion during the day. At night, I can walk through the center of my defined motion zone, but the cam won't record until I'm within 10 feet of it. The defined zone is my driveway which is about 40 feet long and we have 3 cars. As long as the ne'er-do-wells only break into the car parked closest to the Ring cam, they will be recorded. A quick Google search for "ring cam won't detect motion at night" will yield many stories of the Ring product line failing to work in darkness. Apparently, the problem has been documented since September 2017 and Ring has failed to fix it. I must say that I'm beyond disappointed. At least I discovered this in enough time to send the cam back to Amazon for a refund.