The Amcrest ProHD 1080p Wi-Fi video camera helps The Amcrest ProHD 1080p Wi-Fi video camera helps you stay in touch with what you love anytime anywhere. With its 60-second mobile setup process you will have secure access to your camera's video stream in no time. Stream live and playback recorded video of your home your kids your pets ...  More + Product Details Close
Hi Rose, thanks for the reviews. I am about to send a Vivint system back due to the doorbell camera. It does not capture motion events. I am curious as to why you did not review them (or the camera). They are complaining about my upload speed of my WiFi, which makes me ask, where are the motion detection algorithms processed? Are they run on the doorbell, the panel or only after it is uploaded? Did you look into that?
I’ve been considering the Nest Cam IQ outdoor. I see that you did not think the price justified the upgrades. I do agree that it is quite pricey. However, I’m looking for an outdoor camera that has good zoom capabilities. I want to place a camera on my front porch that would show most of the front yard, front door, kitchen door, & the driveway. The driveway is long and mostly shaded during the day and quite dark at night. Someone could park their car in our drive and still be far from the house. If the car was in the line of sight from the camera, say 75 feet, do you know if the Supersight 4k would be better at zooming in on a license plate than the regular 1080p? Any input on cameras for a scenario like this would be great. Thanks!
You can also disarm the system from the app, but in a break from convention, Ring does not offer a key fob for arming and disarming the system. Geofencing that would automatically arm and disarm when you leave and return isn’t supported either. Harris said those were conscious design decisions. “What it came to was security,” Harris said. People said ‘Hey, I want this to automatically disarm my security system when I get close.’ The question then becomes: How close? And is it really you with your phone? Or did someone pick it up at the park, find your address, drive to your house, and let themselves in?”

“We had this pretty much set out, but because we got sued by ADT, because we’re doing something so competitive to them that they had to try to step in our way, which I think is a complement, it released a lot of information about this. I believe that’s why you saw a half-baked announcement that came from a competitor that didn’t even have full pricing and shipping dates on everything. I think it was kind of the opposite; it’s amazing that a competitor that size is reacting to us, and I’ll take that as a complement, too.”


Hey Scott, sorry about your car. Under shortcuts, you will find the video reviews. For Nest, night vision is shared at minute 1:43 and keep playing for just a moment to see night vision from Ring. During the Arlo vs. Canary video (the third video shown), skip to minute :54 to see night vision from Canary and keep playing to see a side by side comparing it to Arlo. To me, they are all about the same. I’ve found that the best night vision comes when you leave the lights on. I actually have automated lights on my porch, and they turn on at sunset and back off at sunrise. Integrating the cameras with a smart home system: I’ve tested Arlo Pro with SmartThings, I wasn’t a fan of that. It actually changes the mode to a new mode called SmartThings. I prefer geofencing mode. Ring I’ve tested using IFTTT, but I haven’t tested it with SmartThings.
You have 2 alarm modes: home and away. Using the app you get to chose which sensors will trip home mode and away mode; to be a little more specific, in the app you can select a sensor and check a box next to away and a box next to home if you want it to trip the alarm even if your alarm is active in “home mode” such as when you’re sleeping at night, where motion sensors inside won’t trip the alarm, but doors or windows opening will do so. You can also select a motion sensor and select a lower sensitivity level in case you have pets. You can do all this from the app even away from home.
Two days later we had the Ring alarm and a Ring doorbell in hand. The whole setup took less than 20 minutes (including the doorbell). Plug in the parts, stick sensors to doors, use the app to walk through configuring them, and you're done. A few minutes later I had the professional monitoring set up. I spent a few minutes familiarizing myself with the features, adjusting alarm volume, adding user codes, etc. It was all just so seamless.
Ring Chime Pro: For $49, you get a Wi-Fi extender and an indoor chime that lets you know when you have Ring notifications. This accessory is particularly useful if you have a lot of Ring devices in a larger home, as it helps you eliminate Wi-Fi dead spots that could prevent important notifications. You can change the alert tone, adjust the volume and put it on a Do Not Disturb mode. If you just want the chime capability without a Wi-Fi extender, the Ring Chime is $29.

After the battery is charged, you can move the camera to a new location, so long as it’s within your WiFi’s range. The camera will work using battery power alone, or you can continue to use it plugged into a power outlet. Since the launch of Canary Flex, Canary has also promised a 4G LTE mount, but they haven’t, and probably won’t deliver. If cellular connectivity is something you’re interested in, I suggest you look into Reolink Go or Arlo Go.


Ring makes sure that no matter your experience level, you're empowered with information. The minute you open the box, there are neatly packaged containers with nearly every component needed to install the kit. Before you do any of that, however, you'll have to add each device through the Ring mobile app, which is extremely straightforward — all you have to do to start setting up accessories is tap the button that says "Set up a new device."

SANTA MONICA, Calif. & SEATTLE--(BUSINESS WIRE)--Ring, a company on a mission to reduce crime in neighborhoods, today announced the upcoming availability of Ring Stick Up Cam Wired and Ring Stick Up Cam Battery. The new Stick Up Cams are Ring’s first cameras meant for both indoor and outdoor use, and further bolster the Ring of Security around homes and neighborhoods. Ring’s ever-expanding line of home security devices, along with the Ring Neighbors app, enable the company to further its mission of reducing crime in neighborhoods across the globe. Ring Stick Up Cam Wired is now available for presale at Ring.com and will begin shipping on October 18. Ring Stick Up Cam Battery will be available in December.
Ring Neighborhoods is a service that lets you share videos with other nearby Ring users or anyone who has downloaded the Ring app. The service ties into another feature called Ring Locations. Ring Locations allows you to attribute your different Ring devices to different locations and customize user access for the same. For example, you might have your Ring Doorbell at one location where your kids have Homeowner user status, while you have Ring Alarm at another location and limit their access to Neighbor.
After receiving Arlo Pro 2, I completed a second battery test in a lower traffic environment. With the same settings, I ran Arlo Pro and Pro 2 side-by-side to see if Pro 2, with its higher resolution, drained the battery faster. It did not. In fact, it held a slightly better charge than Arlo Pro. Of course, I’m assuming this has more to do with the fact that the camera’s battery is newer and less to do with the fact that it’s a different camera. During the second test, both cameras lasted 5 months on a single charge, and it took 2 hours and 30 minutes to recharge the batteries.
You can set motion zones for the lights, too. In this case, the app shows a graphic representation off the motion sensor’s 270-degree range, and you can define where you want movement to turn on the lights by tapping up to three preset zones and then expanding or reducing coverage in those zones using a slider. Depending on your settings, the light will stay on for one to 15 minutes.
Contact sensors come in two pieces, a large sensor part and a smaller magnet part, and both pieces must be aligned within 1/4 inch of each other when the door or window is closed. One piece goes on the door or window while the second part goes on the frame, but it doesn't matter which part goes on which side. When the door or window is opened, the two parts are separated, and the sensor triggers.
I haven’t had that problem, and as you said, I’m running it hardwired. My clips include a front facing image of guests. That said, I’ve recently had issues with wake up times when I’m away from home. As an example, I answered a ring alert yesterday, but it just kept spinning. I had to hard close the app, open it back up, and then check the alert. By then, the guest was gone.
So, is the Ring Alarm for you? If you're looking for a DIY alarm system that provides external monitoring and doesn't cost a fortune, I'd have to say that this is the option to consider. There is no shortage of great options out there from companies like Nest, SimpliSafe, and more, but they all come in much more expensive than this. At under $200 for the base package, it's really hard to beat what Ring is offering here.
The Ring Security System can be a great option, there are just some things you need to keep in mind before you jump in and purchase the system. Instead of chancing it on a company that is just getting started in the home security business, why not go with a company that is absolutely committed to protecting homes and families and has been for many years. Protect America has a proven track record as the 14th largest residential home security company and a Nine-Time Consumers Digest Best Buy Winner. If you’re looking for a tried and tested home security system, contact Protect America for a free quote today.
Ring, maker of one of the original (and still likely the best) connected video doorbell, has launched a comprehensive home security system called Protect, which retails for $199 and includes a base station, keypad (for arming and disarming) a contact sensor for a window or door, a passive infrared sensor for detecting motion and a Z-Wave extender for adding range to smart home devices that use the standard.

Ring Alarm doesn’t support smart lighting controls, door locks, thermostats, garage-door openers, or other common smart home products today, and there’s a very short list of supported third-party products. But it lacks nothing needed to support those and similar devices down the road. And in an interview with Ring Solutions president Mike Harris earlier this week, I learned that’s exactly what Ring intends to do.


The Ring Alarm system has three different modes, which can be set via the keypad or through the iOS and Android apps. There’s the standard disarmed mode that turns off all of the monitoring; an away mode that watches all of the installed sensors for intrusions; and then a “Home” mode, which by default will monitor sensors installed on entryways, but ignores motion inside the house. I’ve used the latter mode as basically a night or sleep setting, since during the day my family moves in and out of the house a lot and would constantly trip the door sensors.
That said, using abode with a Nest Cam is my recommended solution, and integrating the two provides one major advantage: more free storage for your Nest Cams. The major disadvantage is that even if you are a Nest Aware subscriber, abode can only store snapshots. If you want video clips or continuous cloud access, you will need to pay for Nest Aware to access your footage via the Nest app.
The Ring Alarm system comes with a base station, a keypad, an entry sensor, a motion sensor, and a Z-Wave range extender. Also included in the box are installation kits containing mounting tape and hardware for the keypad and the two sensors, an AC adapter for the base station, a USB power adapter and cable for the keypad, a getting started guide, and an alarm kit security basics guide.
Thank you so much for your great review! It’s so thorough and really helps with decision-making. My question is, what would you pick between the Ring Cam Battery and the Arlo Pro (not the 2)? I purchased the Ring Spotlight Cam Battery because I liked the idea of the light and the battery power, but as i read my reviews, I see that the video can lag, and it’s quality is highly tied to the WiFi signal. I also bought the Arlo Pro because it was on sale and it seemed to get really top reviews even though it’s only 720p compared to the Ring Cam Battery. I will be mounting these outside. I noticed that the Arlo Pro 2 way talk is really hard to hear compared to the Ring Cam Battery. Thank you again for all your information!
Hey Scott, sorry about your car. Under shortcuts, you will find the video reviews. For Nest, night vision is shared at minute 1:43 and keep playing for just a moment to see night vision from Ring. During the Arlo vs. Canary video (the third video shown), skip to minute :54 to see night vision from Canary and keep playing to see a side by side comparing it to Arlo. To me, they are all about the same. I’ve found that the best night vision comes when you leave the lights on. I actually have automated lights on my porch, and they turn on at sunset and back off at sunrise. Integrating the cameras with a smart home system: I’ve tested Arlo Pro with SmartThings, I wasn’t a fan of that. It actually changes the mode to a new mode called SmartThings. I prefer geofencing mode. Ring I’ve tested using IFTTT, but I haven’t tested it with SmartThings.
Unfortunately, Ring doesn’t currently, nor does it appear to be adding any type of home automation features, but it is compatible with many third-party smart home services. Although Ring doesn’t offer professional monitoring services, they do offer live streaming when hardwired to your existing doorbells power supply. Ring Live View does not work when using the internal battery. Since most users prefer to use the Ring internal battery, paying for one of the Ring video recording packages is the ideal option.
×