The device shipped ready to be mounted on an eave, but I decided that I wanted to mount it on a wall. To do that, you have to swap the mounting plate from an upward facing to a downward facing position. What I learned while doing so is that Ring fails to mention that the device does not ship with the security screw already in place so even if the mounting plate is already in the position you want, make sure to check on the security screw. Instructions on removing the mounting plate are found on page 15 of the included instruction manual.
We went with SimpliSafe instead. I don't have any experience with their newest version, but their "version 2" which is still for sale has been flawless for the ~4-5 years we have had it. Never a false alarm and more importantly, NEVER a "can't connect to base station ..." error. It is $15/month for monitoring through SimpliSafe, but I'll gladly pay $5 more a month for reliability.
I would go beyond resolution and consider what you want the camera to do. My favorite outdoor camera is Arlo Pro, but a battery-powered outdoor camera will come with its own challenges. In my front yard, I need 24/7 continuous recording which is Nest, but I can’t deal with the way the giant wire looks on Nest Outdoor so I used Nest Cam Indoor filming through a window for a couple of years, which also has its own challenges, until I swapped out my Ring Doorbell for Nest Hello. Nest Hello is Nest’s video doorbell and it can record continuously.
Ring, an Amazon company, also sells several security sensors. First is the keypad. The keypad runs on battery power, and you can wall mount it or place it on a flat surface. In addition to arming and disarming your system, the Keypad Control Panel allows you to choose between Armed Away and Armed Home. When using the keypad to arm your system, it provides a grace period to reduce false alarms. You can customize the grace period using the mobile app. Finally, you can simultaneously press and hold the check and x buttons for three seconds to trigger the panic alarm.
I actually bought mine from Home Depot. So Ring has some work to do with this product as it was put out into the market too early with some engineering issues. First off I will say that during the DAY the camera works just as good as the ring doorbell. I get consistent motion alerts in the Daytime in the zones I set up with the camera. However during the night its a different story. I set up the camera on the soffit of my garage which is 8 feet from the ground. Ring specifically says that you CAN mount on the soft (under the roof line) of a house, however when mounting the camera the installation instructions say that the sensor under the camera (the big globe white thing) must be parallel to the ground. Unfortunately Ring poorly engineered the camera where the vertical axis of the arm for the camera would not allow me to adjust the camera angle any higher so that the sensor would be horizontal to the ground. Due to this the camera and floodlights will not sense me during the night until your 5-8 feet away from the thing which is totally counter productive to what I bought the whole camera floodlight combo for. I am still currently working with Ring customer support on this but it might end up with me making another hole in my garage to mount it on the side but I do not want to do this until I get a firm answer from Ring that this will work. As far as connectivity and video quality I have no issues. But to sum this review up DO NOT BUY IF YOUR MOUNTING TO A SOFFIT 8 FOOT OR LOWER. I will update my review when necessary.
There are so many home security systems to choose from; how can you possibly narrow it down and choose just one? There are obviously pros and cons to each system, so you need to think about what’s important to you and what you most value in a home security system. There really isn’t too much known about the Ring security system just yet because it’s very new on the market. The company has made themselves known for their video doorbells, but is just starting to dabble in home security systems. You’ve probably seen the videos of attempted burglars and package stealers caught red handed with Ring doorbells. Clearly, this innovative product has worked well so far. What should you keep in mind, though, when looking at the Ring Security System?
If you're set to Home and Armed and you trigger an entry sensor that's fitted anywhere but your front door, the base station will sound a piercingly loud 104-decibel alarm until you can get to the keypad, or to your phone to deactivate it. If you're Away, both the motion and the entry sensors will trigger the alarm — unless, again, the entry sensor is affixed to the front door, in which case it will start a 60-second countdown until you enter your PIN (you can adjust the timer as you need).
Installing the keypad was simply a matter of plugging it in and waiting a few seconds for it to be recognized. I gave it a name and a location, used the included mounting screws to hang the mounting plate on a wall, snapped the keypad into place, created an Access Code for arming and disarming the system, and was done. Installing the motion sensor was just as easy: I removed the battery tape and waited a few seconds for it to be added to the app. I gave it a location and a name, used the double-sided tape to mount it to a wall, and tested the sensor. To install the Z-Wave range extender, I plugged it into a wall outlet between the base station and the motion sensor (the farthest device from the base station), named it, and assigned it to a room. The entire installation took around 20 minutes.
While you aren’t required to purchase professional monitoring, both Ring and Nest offer you the option of doing so. The purchase of 24/7 monitoring gives you peace of mind that professionals are keeping an eye on your home security on your behalf. The Nest Secure offers professional monitoring for $19 a month if you sign up for a three-year contract, or you can pay month-to-month for $29 a month. The Ring Alarm offers various plans that allow the user to pay by the month or by the year. The Protect Basic Plan is available for $3 a month or $30 a year per camera, while the Protect Plus Plan is $10 a month or $100 a year, and the service can be applied to an unlimited number of security cameras. It also includes professional monitoring.
While having a couple of power/connection options already provides flexibility, there is even more flexibility thanks to accessories (sold separately). The first accessory is a Secure Mount that locks your device into place. Replacing the magnetic base, it helps prevent device theft. The second is the Stake Mount: Stick the mount into the ground or a potted plant to give Flex a hidden camera effect. Third is the Twist Mount, which can bend and wrap around an object so that you can hang it virtually anywhere. Canary suggests using it to place Flex on fixtures, railings, or even branches.
Next, they have plans to sell a Ring Smoke & CO Listener that listens for the sound of your smoke detector then sounds your siren and sends an alert if anything is detected. Keep in mind that this is not a smoke detector, but rather a device that will supplement your current smoke alarm system. As already mentioned, you can also buy the First Alert Z-Wave Smoke/CO Alarm, which will connect to your Ring Alarm system.
Press Continue and follow the video instructions to press the button at the top of the device, at which point the LED will begin flashing white. Press Continue again and go to your phones Wi-Fi settings to connect to the camera. Return to the app, select your home Wi-Fi from the list, and enter your password. Within seconds the camera will connect and you'll have the option to view a video tutorial that will walk you through the physical installation, or you can skip this step and use the written instructions. In the final step you'll be prompted to define Motion Zones, but you can come back to this later if you prefer.
The base station connects to Ring Alarm devices using Z-Wave Plus. In theory, it could also connect to third-party devices using the same as well as Zigbee, Wi-Fi, and Bluetooth; however, it cannot currently connect to other devices besides the First Alert Smoke and Carbon Monoxide Alarm. Like abode and Nest, Ring’s Base Station includes battery backup, an integrated siren (104db), and a cellular chip which you can activate by paying just $10 per month. Finally, while you can connect to the Base Station via Ethernet, it’s not required.
Works with Alexa Devices With a Screen, Google Assistant, IFTTT, SmartThings, Stringify Alexa Devices With a Screen, Google Assistant, IFTTT, SmartThings, Stringify Alexa Devices With a Screen, Google Assistant, IFTTT, Stringify Alexa Devices With a Screen, Google Assistant, IFTTT, Stringify, Wink Alexa Devices With a Screen, Google Home, IFTTT, Works with Nest, Stringify Alexa Devices With a Screen, Wink, Google Home
Sightline is accessed from the mobile app. From the app, you can see your video history marked with color-coded activities. The colors represent different zones set by you. For example, a green dot might be driveway activity whereas an orange dot is an activity from your porch. If you own a Nest Secure security system, events triggered by the system will also show up in the Sightline as red dots or bars. You will also be able to see a “snapshot” of the event. Finally, using Sightline, you can swipe to fast forward through several days’ worth of footage.
My final issue with Canary Flex has less to do with the device itself and more to do with the company behind the camera. Over the years, Canary has made a lot of changes to their cameras, and the changes don’t always benefit the customer. For example, they promised free two-way audio, but then started charging for it, and for a long time they provided free cloud storage, now they offer what they call “digestible Video Previews.” Changes such as these are concerning.
All that said, the biggest flaw with price is that purchasing Nest’s multi-purpose sensors may be forcing you to purchase more equipment than you need. Most homes don’t need three motion sensors, especially if the sensors have a decent range. Remember, Nest’s motion detectors only detect movement within a 10-foot range, the abode motion sensor has a 120° field of view and can detect motion within a 34-foot range so you would need at least two Nest motion-enabled devices for every one abode motion sensor. Ring’s motion sensor’s range is unlisted, but I tested it at 35 feet, and it worked perfectly.
The next step is camera placement, and Arlo Pro offers a few options. It can sit on a flat surface, stick directly to a metal surface (magnetic), or you can use the included plate to mount it to a wall. While you can place Arlo inside or out, the camera’s power cord that ships with the package is not weatherproof so plan to use battery power when placing the camera outside. If you’re willing to spend an extra $25, you can also buy the weather-resistant outdoor power adapter (VMA4900) that works with Arlo Pro, Arlo Pro 2, and Arlo Go. Finally, they also sell an $80 solar panel. The panel works with Arlo Pro, Pro 2, and Go, and can power one camera continuously. Keep in mind, however, that the solar panel only powers the camera. It does not charge the camera’s battery.
Quiet Open allows you to bypass an armed sensor simply by touching it. For example, if your system is armed, but you want to check the weather outside, you can press the sensor, and open your door. While I’ve heard only praise for this feature, my initial reaction was that it seems like a security flaw. Your teenagers, for example, can press the sensor and sneak out. Furthermore, there is no identification tied to using the feature. For example, it won’t say, “Rose bypassed the sensor.” Fortunately, you can turn this feature off if you’re concerned.
Ring offers access to a timeline-style feature where you can view events going back six months (if you are subscribed). From the timeline, you can sort through ring events, motion events, starred events, or live view events. From the web app, you can also sort by device so that you can separate your Spotlight Cam footage from footage captured by your other devices. Right now, the feature isn’t very advanced. Soon, Ring plans to completely revamp their mobile app.
The base station is also wall-mountable and can be installed on a Wi-Fi network or connected directly to your internet router over Ethernet. It has a 24-hour battery backup plus the ability to connect to an LTE network in the event of a power outage. (The LTE connectivity is available when you subscribe to Ring’s Protect Plus monitoring service and uses AT&T’s network.) Both the keypad and the base station feature colored LED rings to signify if the system is armed or disarmed and have built-in speakers to sound the alarm in the event of an emergency or intrusion.
The keypad includes a reversible mount that can be attached to a wall as a bracket or flipped over and used as a tabletop stand at a slight incline. Ring includes a micro-USB cable and an adapter to power the keypad, but it also has an internal rechargeable battery that can last up to a year depending on your settings, so it's handy to be able to set it up wirelessly on a table or mounted to the wall, only recharging periodically as needed.
The Ring Doorbell Camera security system was acquired by Amazon. They currently offer doorbell cameras and exterior security lighting cameras. And according to their website product page, Ring will soon be adding indoor security and environmental protection products to their lineup as well. This is great news based on how popular their current products have become.