Use the Device Health button to view signal strength, firmware version, and the current Wi-Fi network you are connected to, and the Linked Chimes button lets you enable motion settings for any Ring Chime devices you may have installed. Motion Settings lets you adjust sensitivity using the slider, create detection zones, and set up schedules for enabling/disabling motion alerts, and Motion Snooze lets you temporarily turn off alerts. Tap the Shared Users button to invite friends and family to view video clips, and the App Alerts Tones button to assign one of a dozen sounds to play when motion is detected.
Ring Alarm doesn’t support smart lighting controls, door locks, thermostats, garage-door openers, or other common smart home products today, and there’s a very short list of supported third-party products. But it lacks nothing needed to support those and similar devices down the road. And in an interview with Ring Solutions president Mike Harris earlier this week, I learned that’s exactly what Ring intends to do.

Ring, an Amazon company, also sells several security sensors. First is the keypad. The keypad runs on battery power, and you can wall mount it or place it on a flat surface. In addition to arming and disarming your system, the Keypad Control Panel allows you to choose between Armed Away and Armed Home. When using the keypad to arm your system, it provides a grace period to reduce false alarms. You can customize the grace period using the mobile app. Finally, you can simultaneously press and hold the check and x buttons for three seconds to trigger the panic alarm.
“We had this pretty much set out, but because we got sued by ADT, because we’re doing something so competitive to them that they had to try to step in our way, which I think is a complement, it released a lot of information about this. I believe that’s why you saw a half-baked announcement that came from a competitor that didn’t even have full pricing and shipping dates on everything. I think it was kind of the opposite; it’s amazing that a competitor that size is reacting to us, and I’ll take that as a complement, too.”
Device Theft Optional Wall Mount Optional Wall Mount Screwed in using proprietary screws, Ring will replace stolen devices. Depends on the Mount – Quick Mount easier to steal, Security Mount is a more permanent solution. Easier to steal. The power adapter twists off and the Nest Cam can be removed from the magnetic base by pulling. Secure Mount (Sold Separately)
Would it be better than 1080p? Yes. Would it be good enough? I don’t know. I only tested the indoor IQ, not the outdoor. I didn’t think Supersight was that fabulous. Here’s a link to a section of my video that shows the Supersight in action (https://youtu.be/BIWchrX27fU?t=2m28s and also here https://youtu.be/BIWchrX27fU?t=56s). On the white table that’s on the right side of the frame, there are a few books stacked up. You can’t even read the titles on the bindings, but maybe a license plate would be different?
Installing the Ring Alarm system is easy thanks to the well-written getting started guide. I already had a Ring account, but if this is your first ring device, start by downloading the Ring app and creating one. I opened the app and tapped Add a Ring Product, selected Alarm from the list, and confirmed my location. I plugged in the base station and pressed the pairing button, which started the blue LEDs spinning, indicating that the station was in pairing mode. I tapped Find My Base Station in the app and selected Wi-Fi as my internet connection method (you can connect via Ethernet or Wi-Fi), selected my router's SSID, and entered my Wi-Fi password. The LEDs flashed white momentarily before turning solid blue and the Wi-Fi indicator turned green, indicating a successful pairing. The app also confirmed the connection.
Speaking of monitoring, there are different modes that you can set when arming the alarm. When you're at home, there are two choices, including Disarmed and Home. With disarmed, there is no 3rd-party monitoring happening, so you can open and close the doors, windows, and more as you please. Home mode is used for times like when you're home alone or going to bed, and there is external monitoring involved. With Home mode, you can opt to change which sensors are active and which aren't, which is great for if you don't want a motion sensor to go off because of your pets or something.
I'm a Ring user, with a Video Doorbell 2 and a Floodlight Cam already installed at my house, but I don't have any prior experience with home security systems. That made for a bit of a learning curve just in terms of figuring out how I wanted to set things up and remembering to arm/disarm the system at the appropriate times. But Ring Alarm is intended as a simple do-it-yourself system that makes it easy for even novice users to get up and running, so perhaps I'm an ideal candidate for testing things out.
Canary also allows you to share access with other users. Through the Canary app, all users will have full control over your cameras. If you want to limit other users’ access, you can choose who has access to what camera through the use of multiple locations. For example, you can give person A access to location 1 but not location 2. Better still, locations can be at the same address so your location 1 and location 2 can both include cameras in your home.
So let’s talk cost for a minute. For $399, Nest includes a Nest Guard which also acts as a keypad, siren, and motion detector, two Nest Detects which are also motion sensors, and two Nest Tags. An equivalent package from abode would cost $479. A comparable package from Ring would cost $279. However, Ring doesn’t sell a key fob, and the kit includes a range extender, so that needs to be factored into the equation.
Ring's professional monitoring isthrough Rapid Response Monitoring Services, and it's one of the more affordable services available. For $10 a month (or $100 a year if paid up front), you get the benefits of dispatchers on standby, and this includes video storage for any Ring cameras you might have. There's no long-term contract, either, so you can cancel any time you don't need it through the Ring website.
It’s not ideal, but it’s not terrible. I just went out there and stood sideways to the camera and you could still see me. The farther back I stood, the better the picture. Take a look at the article and scroll all the way to the bottom. I put two pictures up temporarily. Let me know once you see them as I’m going to take them down. I suggest buying it and testing it out using the battery by placing it where your current doorbell is BEFORE you actually install it. If you think it will work, go for it. If not, send it back.
The Home mode monitors only sensors installed at entry points into the home but will ignore any motion or movement that occurs within the house itself. The home mode works great for a night setting, especially if people in your family are prone to moving throughout your home at night. Typically this movement would trip the sensors, but not in Home mode.
Installing Canary Flex was easy. Part of that comes from the fact that I’m a Canary indoor camera user. To add Canary Flex, I plugged it in (Even though it can be battery-powered, Canary recommends starting with a full charge.), turned my phone’s Bluetooth feature on, visited the app, and selected “Add Canary device”. From there, you confirm the physical location of your camera, tap the button on the back of the device, and it begins to pair.
You can also disarm the system from the app, but in a break from convention, Ring does not offer a key fob for arming and disarming the system. Geofencing that would automatically arm and disarm when you leave and return isn’t supported either. Harris said those were conscious design decisions. “What it came to was security,” Harris said. People said ‘Hey, I want this to automatically disarm my security system when I get close.’ The question then becomes: How close? And is it really you with your phone? Or did someone pick it up at the park, find your address, drive to your house, and let themselves in?”
If the security device isn’t try to prevent jamming at all (And the protocol is one way – from sensor to main hub), all the thief need is a 10$-30$ device (definitely not close $1,000) which actively send signals and prevent the good signal to pass (the cheap signal jammer can be adjusted to frequency like you turn on a radio. the frequency itself is probably common in all devices or can be found on device manual) [not putting a security sign is https://en.wikipedia.org/wiki/Security_through_obscurity but it may be better than nothing].
Once you're logged in, follow the straightforward prompts to connect each accessory. This was one of the easiest security system setups I've ever encountered; literally pull the battery tab on the battery-powered door/window sensor and motion sensor and plug in the base station, the keypad and the Z-Wave range extender, and they automatically connect to the app.
All the components in the Ring Alarm system use Z-Wave Plus radios and support Z-Wave’s S2 security framework, but Harris told me there’s also a ZigBee radio onboard as well as some other surprises that aren’t discussed in the user manual. “You’ve got Wi-Fi, you’ve got LTE, you’ve got Z-Wave, you’ve got ZigBee….” Harris said. “I’m sure people will open it up and see there’s another radio in there that’s not turned on yet. There’s an awful lot going on in there.”

Ring does include a practice mode with its professional monitoring, and by default for the first seven days after activating your account authorities will not be contacted if the alarm is triggered. This gives you time to learn how your system works without burdening authorities with false alarms. If you wish to exit practice mode before the seven-day period is up, you can do that, but Ring will warn you in the app about the importance of making sure everything is working properly before you do that. 

Along the bottom of the screen are buttons for Event History, Device Health, Linked Chimes, Motion Settings, Motion Snooze, App Alert Tones, and Shared Users. The Event History screen offers a list of recorded activity. Tap any event to play a clip and share it with friends and family or with your neighbors by pressing the Ring Neighborhoods button. Ring Neighborhoods is a feature that lets you share recorded events with neighbors who have downloaded the app and signed up to participate. It is based on the location data entered during setup and allows you to add a comment along with your clip.

The spotlight is provided by LED light strips on either side of a 140-degree wide-angle lens, which activate when motion is detected. The motion sensor, encased in a dome on the bottom of the camera, has a 270-degree detection range. The camera streams and records video in up to 1080p resolution and supports two-way talk with noise cancellation and night vision up to 30 feet.


Ring's $199 Z-Wave-enabled Alarm Security Kit is so simple you might overlook it at first. The system includes a base station, a keypad, a door/window sensor, a motion sensor and a Z-Wave range extender. It's all basic hardware with basic functionality -- you won't find any fancy features here -- but the Security Kit is super simple to set up and monitor in the Ring mobile app. 

×