Oco Pro Bullet is weatherproof, has an SD card, cloud storage, night vision, smart motion detection, and records in FHD 1080p. It can also work in a wide range of temperatures, from -22 °F – 140 °F (-30 °C – 60 °C). But it has one massive limitation: viewing angle. Unfortunately, it only offers an 85-degree viewing angle. Also, the indoor version fell flat on many of its promised features. While the outdoor camera uses different hardware, the indoor experience left me feeling leery towards Oco’s ability to build a quality camera.
Installing the keypad was simply a matter of plugging it in and waiting a few seconds for it to be recognized. I gave it a name and a location, used the included mounting screws to hang the mounting plate on a wall, snapped the keypad into place, created an Access Code for arming and disarming the system, and was done. Installing the motion sensor was just as easy: I removed the battery tape and waited a few seconds for it to be added to the app. I gave it a location and a name, used the double-sided tape to mount it to a wall, and tested the sensor. To install the Z-Wave range extender, I plugged it into a wall outlet between the base station and the motion sensor (the farthest device from the base station), named it, and assigned it to a room. The entire installation took around 20 minutes.
The second issue I have for the system is that there is no quick exit feature. For the entire six years that I've had a security system, I have been used to being able to press a button that will give me one minute to quietly exit the house. This is important when I am leaving for work a few hours before my family wakes up for their day. The Ring system doesn't have this feature at all. When the system is armed, it has to be disarmed (which it announces) and rearmed before exiting with a delay that can be set up with your phone (it will announce this as well and will make a sound while it counts down) or can be armed from your phone after you leave (again, it will announce this with the countdown sound). You either have to chose if you want the system to count down or not. Not counting down will immediately arm it and you will have to arm from your phone if you leave and arm it on the "Home" setting while others are still there. You can adjust the sound that is emitted from the panel so that it isn't loud, but it will also make your door and window chimes use the same volume all of the time. If you have your system armed while you’re home, and the volume is down, you might not hear the system telling you that it needs to be disarmed if you forget and open a door. There is no in-between here. If you have to leave while others are still sleeping, this may be a problem for you.
Next, they have plans to sell a Ring Smoke & CO Listener that listens for the sound of your smoke detector then sounds your siren and sends an alert if anything is detected. Keep in mind that this is not a smoke detector, but rather a device that will supplement your current smoke alarm system. As already mentioned, you can also buy the First Alert Z-Wave Smoke/CO Alarm, which will connect to your Ring Alarm system.
Oco Pro Cloud Video Surveillance Camera is easy Oco Pro Cloud Video Surveillance Camera is easy to use HD Wi-Fi camera with Cloud and SD card Recording for monitoring everything you care about: business home children pets elderly parents etc. No Monthly Fees required to access all camera features. Self-learning motion detection system helps Oco understand motion and ... More + Product Details Close
Outdoor security cameras provide a line of defense for your home, and smart capabilities elevate that by adding control and peace-of-mind to your home security system. Today, one of the best on the market, Ring’s floodlight camera, is $314 for a two-pack from Home Depot, a big drop from a list price of $448. And you’ll also get a free $50 Chime Pro Wi-Fi extender and speaker with your purchase.
Great article with lots of useful information. Very comprehensive comparison that really helps people make a wise decision based on their particular needs. FYI, I chose abode for my home security needs because it’s a proven shipping product and it integrates well with other systems. Although the camera quality might not be as good as others, it will suffice for my needs.
“We had this pretty much set out, but because we got sued by ADT, because we’re doing something so competitive to them that they had to try to step in our way, which I think is a complement, it released a lot of information about this. I believe that’s why you saw a half-baked announcement that came from a competitor that didn’t even have full pricing and shipping dates on everything. I think it was kind of the opposite; it’s amazing that a competitor that size is reacting to us, and I’ll take that as a complement, too.”
2) many users have not come up to speed on the functionality fo this system. thats not their fault.its really easy to set up quickly and with basic functioning, But the more you fool around/experimenter/learn about the system the more functionality it has. Ring really needs to come out with a comprehensive instruction manual and/or video-once you understand take keypad you will grasp it actually has more functionality and is easier to use than most legacy hard wired systems people are replacing.
When you say “full coverage” I’m assuming you mean continuous recording, is that right? Arlo and Nest can record continuously, but only if they are plugged in. Also, the outdoor power cord for Arlo is new and it’s on a pretty long lead time right now. It’s sold separately from the camera. If you could confirm that your new is continuous recording, I’ll dig in a little more, but I don’t want to assume anything before making a recommendation.
The Alarm system performed flawlessly. The base station chimed whenever a sensor was triggered while in Disarmed mode, and the event was added to my history log within seconds of the event. I promptly received push and email notifications whenever there was a mode change or when the base station was unplugged and switched to the cellular network while running on battery power. However, the Alarm system does not send push or email notifications when a sensor is triggered while in disarmed mode like the Vivint Smart Home system does. This may not seem like a big deal, but it's nice to know when windows and doors are being opened if you're away while other family members are home with the system disarmed.
For all the things that the Ring Alarm system does well, there are still some areas in which it can be improved. One of my biggest annoyances with the system is that there is an audible alert for when a contact sensor is opened, but there is no alert for when it's closed. I have a sensor on each of the three doors that lead into my house and while it's great to hear a noise that they've been opened, it would be awesome to hear a confirmation that they've been closed as well.
It would have been convenient to have a device like a key fob for the Ring Alarm, as running to find the keypad or navigating the app to turn off the alarm takes a few seconds too long, but one does not currently exist. However, arming and disarming the system is relatively straightforward. I just had to dig through the paper manual to figure out how to correctly enter my PIN to change modes.
Installing Canary Flex was easy. Part of that comes from the fact that I’m a Canary indoor camera user. To add Canary Flex, I plugged it in (Even though it can be battery-powered, Canary recommends starting with a full charge.), turned my phone’s Bluetooth feature on, visited the app, and selected “Add Canary device”. From there, you confirm the physical location of your camera, tap the button on the back of the device, and it begins to pair.
The device’s design causes another issue. In theory, each clip cable needs to be screwed in. I’ve heard others claim this is for security reasons, making the device harder to steal. But I don’t see how this could be true. It’s not hard to walk up and unscrew the camera from the cord and walk away with it. The camera attaches to the base using a magnet, and it connects to the power adapter using a cord that you simply push and twist to disconnect.
For the backyard camera I also installed the solar panel which is packaged separately with its own mounting kit. Once it’s mounted, you plug the connector wire into the back of the Spotlight Cam and secure it with two screws. It fits flush to keep water out of the port. Ring recommends one to two hours of direct sunlight per day to keep your battery charged, and you can angle the solar panel’s mounting arm to ensure it soaks up as much sun as possible. The days I tested the Spotlight Cam Solar were mostly overcast, but I still saw a 3-4 percent charge increase each day, and I’d expect much more on sunny days.
Meet Oco next generation Full HD Home Monitoring Meet Oco next generation Full HD Home Monitoring Camera with SD Card and Cloud Storage. Monitor everything you care about: your home children pets elderly parents business etc. Setup Oco2 in less than 60 seconds and access Full HD video remotely with our App. No Monthly Fees required to activate ... More + Product Details Close