It would have been convenient to have a device like a key fob for the Ring Alarm, as running to find the keypad or navigating the app to turn off the alarm takes a few seconds too long, but one does not currently exist. However, arming and disarming the system is relatively straightforward.  I just had to dig through the paper manual to figure out how to correctly enter my PIN to change modes.
The Nest Aware 5 day is $50 per year. If you add a second camera, it would be $75 per year for both so the difference isn’t as vast since you get 50% off subsequent subscriptions. My suggestion is that you dig in deeper as there are pros and cons to both so pick the one which has features that best align with your goals. A couple of bonus tips, which you may already know…1. I’ve owned both combos (Ring + a Nest Thermostat) and (Nest Hello + Nest Thermostat). To me, the only advantage is one app, and using two apps wasn’t a big deal IMO. If you use Nest’s Home Away/Assist, you might feel differently, but I don’t take advantage of that feature. 2. I’ve also tried Ring Spotlight and Ring Doorbell together. Again, the only advantage is that you will have one app. You can’t use them to trigger each other. For example, you can’t say, “When someone rings my doorbell, tell Spotlight to record.” I thought that was kind of interesting…
Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.
The Alarm system performed flawlessly. The base station chimed whenever a sensor was triggered while in Disarmed mode, and the event was added to my history log within seconds of the event. I promptly received push and email notifications whenever there was a mode change or when the base station was unplugged and switched to the cellular network while running on battery power. However, the Alarm system does not send push or email notifications when a sensor is triggered while in disarmed mode like the Vivint Smart Home system does. This may not seem like a big deal, but it's nice to know when windows and doors are being opened if you're away while other family members are home with the system disarmed.
The battery version of the camera can only use a battery. You can’t plug it in. According to Ring, the batteries should give you six months of life before needing to be recharged, but that wasn’t my experience. After testing the battery for three weeks, my battery level dropped from 100% to 47%. It was depleted before the two-month mark. If you plan to use a battery, I suggest buying two. As mentioned in the installation guide, Spotlight Cam ships with one battery, but it supports two. This configuration will improve your camera’s uptime. When one battery dies, you can charge it while battery two kicks-in to power your camera. Ring sells additional batteries for $29.
The keypad measures 0.91 by 5.87 by 3.94 inches (HWD) and has numeric keypad buttons (0-9). It also has an X button and a button with a check mark on it: pressing and holding both of these buttons puts the system into Panic mode, which sounds the siren and sends an alert to the professional monitoring service so that police can be dispatched. To the right of the numeric keypad is a round dial with three buttons for putting the system in Home, Away, and Disarm mode, but you'll first have to enter your unique access code. Other LEDs include network and battery indicators, and a faulted sensor LED that tells you if a sensor is open before you arm the system.
After testing indoor Nest IQ Indoor and Nest Cam Outdoor, I’ve decided to pass on Nest IQ Outdoor. Plus, it sounds like this version will require drilling, and I’ve found that Nest’s facial recognition feature doesn’t add more value than their face detection feature. I also don’t have a place for Ring Floodlight. However, I will buy Ring Spotlight. I have six devices in my office waiting to test, so I can’t promise that it’s going to happen quickly, but it will happen! 🙂
3) a brand with the best wifi connectivity record (I HATE when it loses connectivity), this is actually the most important thing to me – the wifi connectivity must be seamless, I’ve had terrible experience with bad wifi connectivity. I want to be able to pull out my phone anytime and instantly be able to see live video. zero tolerance for bad wifi connection:)

When it's time to pair the keypad, the Ring app will have you create a four-digit PIN for arming and disarming the system. If you choose to have professional monitoring, you'll need to also come up with a verbal password to help identify you in case you have to talk to a dispatcher. As a reviewer — and a person who has tripped  countless alarms in the last few months — I also appreciate that there's a seven-day trial period before professional monitoring becomes active, so you can take time to set up the system without worrying about false alarms. It also gives you time to register the alarm so that you do not incur any fees.

Aside from the obvious value proposition, Ring’s big pitch for the Alarm system is its simplicity. Though it has all of the features necessary for a proper home security system – professional monitoring, battery and cellular backup for the event of a power loss – installing the Ring Alarm in my home took less than 20 minutes and involved following the app’s instructions to get the base station on my Wi-Fi network and register each included piece. Cleverly, Ring presets the included motion detector, contact sensor, and range extender to pair with the hub that’s in the box, so getting them set up is just a matter of pulling the battery tab to wake them up and waiting a moment for the app to find them.
I'm a Ring user, with a Video Doorbell 2 and a Floodlight Cam already installed at my house, but I don't have any prior experience with home security systems. That made for a bit of a learning curve just in terms of figuring out how I wanted to set things up and remembering to arm/disarm the system at the appropriate times. But Ring Alarm is intended as a simple do-it-yourself system that makes it easy for even novice users to get up and running, so perhaps I'm an ideal candidate for testing things out.
In fact, just this week I had the power go out at my home, which is also where my office is. I had deadlines to meet, so I decided to go to a coffee shop where I could work and fill up on caffeine. It wasn't until I walked into my garage that I remembered I had to manually open the garage door, disconnecting the door from the chain drive. My particular garage door opener wouldn't let me reconnect the door and the chain drive, locking it in place, so I was stuck with a garage door that anyone could lift open with ease.
The keypad includes a reversible mount that can be attached to a wall as a bracket or flipped over and used as a tabletop stand at a slight incline. Ring includes a micro-USB cable and an adapter to power the keypad, but it also has an internal rechargeable battery that can last up to a year depending on your settings, so it's handy to be able to set it up wirelessly on a table or mounted to the wall, only recharging periodically as needed.
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
It was 20*F outside when I installed the cam. I didn't want to be running up and down a ladder if I had problems connecting to the network. I wired the cam up with a plug (from an old, grounded extension cord) and ran the wifi setup routine at my kitchen table. I verified everything was working (including the app, motion detection, etc.) before I installed it outside.