Most of my setup time was spent testing the position of the three contact sensors I received. The magnetic sensors consist of two parts. One part goes on a door or window frame, the other part goes opposite it so that when the door or window is opened, the magnetic connection is broken. If the two pieces aren't close enough, roughly half an inch, the sensor doesn't work.


If that’s not possible, or if the floodlight feature is really important to you, I recommend either the Ring Floodlight (not tested but I have heard good things about it) or Ring Spotlight. Ring launched a new indoor camera at CES, so that might be an option. I need to dig into it more before I say yay or nay of course. Currently, Nest, Arlo Q, Arlo Pro, and Amazon Cloud Cam are my top recommended indoor cameras.
I’m trying to set my mom up with a constant live feed of their front door. I bought a cloud cam and echo show, before realizing their house isn’t set up to get much of a front door view from the inside. Think a hard wired ring pro with echo show always displaying the live feed would work, or drain the rings battery even though it’s hard wired? Any other ideas? I’d like to keep the echo show, but will probably return the cloud cam.
Ring Stick Up Cam Battery and Stick Up Cam Wired feature motion detection, 1080p full HD resolution, night vision, two-way talk, a siren, and a wide viewing angle – all for $179.99 each. Stick Up Cam Wired is powered by Power over Ethernet (PoE) or through a micro-USB power supply, which gives users a reliable connection to the internet as well as consistent power. For indoor use, Ring Stick Up Cams bring the Ring of Security inside so users are notified of any suspicious motion within the home. For those looking for additional outdoor security, neighbors can place the Stick Up Cams around the outside of the home to monitor activity on their property and help prevent a crime from taking place.
I’ve enjoyed reading your summaries for over a year. I initially had my mind set on Abode after removing iSmartAlarm and SimpliSafe (previous generation) from consideration. I had an Abode package all set and nearly pulled the trigger on a purchase. However, after coming across Ring and reading your review multiple times, I ultimately went with Ring. What won me over was the package being offered by Costco that has six door/window sensors. When I priced out what Abode would cost to have comparable coverage, Ring clearly won out. I don’t need any integrations or automation, thus I don’t feel I’m losing out on those aspects by selecting Ring over Abode.
Hi and thank you for the exhaustive review. I like the option of Ring Doorbell Pro. However, my existing doorbell is on the side of the house, facing parallel to the door across the front steps. If I mounted the Ring there, the camera would capture a profile of the visitor as they approach the door. It would not capture their face head on, would not (likely) capture them them as they approach the steps, which is where delivery people often leave packages (my interest in Ring, Arlo, etc., came out of the neighborhood social app conversation about a rash of package thefts), and would not capture the car they drive as it would face parallel to the street, not into the street. My question is: what would the installation of Ring look like on or near the front door, where there is no existing wiring? Is my existing setup enough to steer me away from Ring and toward a battery powered option?
So let’s talk cost for a minute. For $399, Nest includes a Nest Guard which also acts as a keypad, siren, and motion detector, two Nest Detects which are also motion sensors, and two Nest Tags. An equivalent package from abode would cost $479. A comparable package from Ring would cost $279. However, Ring doesn’t sell a key fob, and the kit includes a range extender, so that needs to be factored into the equation.
One final issue has more to do with software performance than hardware issues, but it’s important to point out. From time-to-time, the snapshot will record a little too late. In the example above, it caught the UPS man’s back. For those without a Nest Aware subscription, this is all you get. Those with a subscription can rewind footage to see the moments before the clip.
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.

Nest Cam Outdoor’s temperature range is limited to -4° to 104°F. In the same breath, the Nest team warns of placing the camera in direct sunlight to avoid overheating the device. So if the device can only handle 104° and it might heat up in the sun, is it really ready to live outside? Perhaps it’s not that the device isn’t ready to live outside, but that it’s more suited for temperate zones.


I’ve only tested one cloud-less camera this year (Reolink Argus) and it’s battery-powered. And if you’re asking about systems like Amcrest and Swann, I don’t have anything similar. I mainly focus on cloud cameras for now, but who knows what the future holds! Currently, I’m working on an updated indoor camera version of this article, but all the cameras I’m testing use cloud storage.
Arlo Pro is preprogrammed with four modes: Armed, Disarmed, Schedule, and Geofencing. Most of the modes are customizable, and you have the option of adding your own customized mode. You can even create different rules for different cameras. For example, armed mode on camera A might mean that if it detects motion or audio, it will record, while armed mode on camera B might mean that if motion is detected, it sounds the siren, but doesn’t record. You can also decide if you would like push alerts, email alerts, or no alerts.
The Ring mobile app recently got a facelift that gives it a more polished Dashboard featuring live preview windows. The Alarm controls are at the top of the Dashboard screen and include Disarmed, Home, and Away buttons. Below the buttons is the status of all installed sensors (cleared, open), and below that are tabs for viewing Neighbors posts and Event History.
Disclaimer: The information featured in this article is based on our best estimates of pricing, package details, contract stipulations, and service available at the time of writing. All information is subject to change. Pricing will vary based on various factors, including, but not limited to, the customer’s location, package chosen, added features and equipment, the purchaser’s credit score, etc. For the most accurate information, please ask your customer service representative. Clarify all fees and contract details before signing a contract or finalizing your purchase.
Ring also sells several cameras including the Ring Video Doorbell, the Video Doorbell 2, Ring Elite, and Video Doorbell Pro. They also sell a Floodlight Cam, Spotlight Cam, and two versions of their Stick Up Cam. Most of the cameras are geared toward outdoor use with the exception of Stick Up Cam Wired and Stick Up Cam Battery. The two cameras can be used indoors or outdoors.
It was 20*F outside when I installed the cam. I didn't want to be running up and down a ladder if I had problems connecting to the network. I wired the cam up with a plug (from an old, grounded extension cord) and ran the wifi setup routine at my kitchen table. I verified everything was working (including the app, motion detection, etc.) before I installed it outside.
×