Ring's Neighborhood is a cool feature that lets you share recorded events with neighbors who have joined the Neighborhood. You'll receive alerts when a neighbor posts a video and when there's fire and police activity in your neighborhood. The Events tab takes you to a screen where you can view a list of all camera and alarm events including sensor activity, arming and disarming times, and motion detection. Below the Neighbors and Events tabs are windows with live views of each installed Ring video doorbell and camera.
The device shipped ready to be mounted on an eave, but I decided that I wanted to mount it on a wall. To do that, you have to swap the mounting plate from an upward facing to a downward facing position. What I learned while doing so is that Ring fails to mention that the device does not ship with the security screw already in place so even if the mounting plate is already in the position you want, make sure to check on the security screw. Instructions on removing the mounting plate are found on page 15 of the included instruction manual.
Ring’s motion sensors and contact sensors are much more traditional than Nest’s, which cleverly combine the two into a single device that also adds a nightlight. Nest’s base station also combines the keypad with it and adds even more motion detection sensors – Ring’s separate base station and keypad approach is almost clumsy in comparison. But it is possible to add multiple keypads to the Ring system, so you can have one at each entry way or in your bedroom if that’s a more convenient place for it. The keypad can be placed flat on a table or mounted to the wall, and uses a simple MicroUSB cable for power. Its internal battery lasts between six and twelve months, according to Ring, so it’s possible to install it in a location that doesn’t have an accessible power outlet and just charge it occasionally.
The keypad measures 0.91 by 5.87 by 3.94 inches (HWD) and has numeric keypad buttons (0-9). It also has an X button and a button with a check mark on it: pressing and holding both of these buttons puts the system into Panic mode, which sounds the siren and sends an alert to the professional monitoring service so that police can be dispatched. To the right of the numeric keypad is a round dial with three buttons for putting the system in Home, Away, and Disarm mode, but you'll first have to enter your unique access code. Other LEDs include network and battery indicators, and a faulted sensor LED that tells you if a sensor is open before you arm the system.
My final issue with Canary Flex has less to do with the device itself and more to do with the company behind the camera. Over the years, Canary has made a lot of changes to their cameras, and the changes don’t always benefit the customer. For example, they promised free two-way audio, but then started charging for it, and for a long time they provided free cloud storage, now they offer what they call “digestible Video Previews.” Changes such as these are concerning.
In home mode, the default setup is for motion sensors to be ignored while door/window sensors will trigger the alarm to activate. This mode is obviously intended for when you're moving around inside your home but want to be protected if someone enters the house through a monitored door or window. Finally, away mode arms all sensors so that any opened monitored door or window or movement within the house will set off the alarm.
While you aren’t required to purchase professional monitoring, both Ring and Nest offer you the option of doing so. The purchase of 24/7 monitoring gives you peace of mind that professionals are keeping an eye on your home security on your behalf. The Nest Secure offers professional monitoring for $19 a month if you sign up for a three-year contract, or you can pay month-to-month for $29 a month. The Ring Alarm offers various plans that allow the user to pay by the month or by the year. The Protect Basic Plan is available for $3 a month or $30 a year per camera, while the Protect Plus Plan is $10 a month or $100 a year, and the service can be applied to an unlimited number of security cameras. It also includes professional monitoring.
For instance, you cannot use the contact or motion sensors to turn lights off and on, and the system doesn’t have the ability to adjust your smart thermostat when the system senses that you leave your home. The Ring Alarm system does use Z-Wave technology, which is a widely used standard with smart home devices; however, it doesn’t utilize this functionality as much as it could.
I’ve enjoyed reading your summaries for over a year. I initially had my mind set on Abode after removing iSmartAlarm and SimpliSafe (previous generation) from consideration. I had an Abode package all set and nearly pulled the trigger on a purchase. However, after coming across Ring and reading your review multiple times, I ultimately went with Ring. What won me over was the package being offered by Costco that has six door/window sensors. When I priced out what Abode would cost to have comparable coverage, Ring clearly won out. I don’t need any integrations or automation, thus I don’t feel I’m losing out on those aspects by selecting Ring over Abode.
That said, using abode with a Nest Cam is my recommended solution, and integrating the two provides one major advantage: more free storage for your Nest Cams. The major disadvantage is that even if you are a Nest Aware subscriber, abode can only store snapshots. If you want video clips or continuous cloud access, you will need to pay for Nest Aware to access your footage via the Nest app.
Though the Ring Alarm system covers the bases for a home security setup, there’s a lot of room for integration with other smart home products that Ring has left on the table. For example, it’s not possible to use the Ring’s motion or contact sensors to trigger lights or adjust a smart thermostat when you leave or come back home. This is despite the fact that the Ring Alarm sensors are based on Z-Wave technology, which is a widely used smart home standard.
If you have a dog or a cat, getting a home alarm that won’t be constantly triggered by Fido or Fifi’s movements is a real question you have to consider. The Ring Alarm claims that it won’t detect pets weighing under 50 pounds if the alarm is mounted above seven feet, while pet-friendly motion detection is already integrated into the Nest base station and door sensors.
I’ve had 2 Arlo Pro cams for a few months now. They both work very well, although the false motion trips by wind or in my case a train that comes by is a bit annoying. But what I have found is that I really want a camera that is on 24/7, that I can go back and scan thru in case there’s an issue. The other thing is the delay. I had a person enter my property and the Arlo caught him just as he was almost out of the camera. A friend of mine told me to check out a FLIR camera. I don’t have a good home security system, so I would like to have something that can expand as far as needed. I can always take my Arlo to my office and use it there if I decide to switch.
Ring provides 24 / 7 professional monitoring of the Alarm system through its Protect Plus service, which will automatically notify authorities and emergency services if there’s an intrusion or crisis detected. The service will alert you and other emergency contacts you set via phone and then dispatch emergency personnel as needed. Though the Ring Alarm will provide push notifications to your mobile device without the additional monitoring service, having the service ensures that emergency services are deployed automatically whether you see the push notifications or not.
Ha! That’s funny. Anywho, Arlo. Yes, Arlo needs the base station. The cameras only talk to the base station which creates its own network. The max range is stated at 300ft between base station and camera, which I assume is direct line of sight. If I had to guesstimate the distance between my base station and camera I would say 50 feet max? I haven’t tested beyond that.
“Where we’re going with it is once we know this, we can then do things in our network which include, you know if someone’s walking around your house at 3 AM in the morning and your house is on stay mode, then we can do a different type of alert or sort of raise the alert level on that camera,” explained Siminoff. “And then we do things like deliver presence saying ‘How can I help you, what are you doing?’ and so really taking that presence and that interactivity, and that pre-crime thing that Ring is so good at and take it to the next level by knowing the status.”
UPDATE 16FEB2018: After two weeks, I must downgrade my review... it's become obvious that the Ring Floodlight Cam only detects motion during the day. At night, I can walk through the center of my defined motion zone, but the cam won't record until I'm within 10 feet of it. The defined zone is my driveway which is about 40 feet long and we have 3 cars. As long as the ne'er-do-wells only break into the car parked closest to the Ring cam, they will be recorded. A quick Google search for "ring cam won't detect motion at night" will yield many stories of the Ring product line failing to work in darkness. Apparently, the problem has been documented since September 2017 and Ring has failed to fix it. I must say that I'm beyond disappointed. At least I discovered this in enough time to send the cam back to Amazon for a refund.