Oco Pro Bullet is weatherproof, has an SD card, cloud storage, night vision, smart motion detection, and records in FHD 1080p. It can also work in a wide range of temperatures, from -22 °F – 140 °F (-30 °C – 60 °C). But it has one massive limitation: viewing angle. Unfortunately, it only offers an 85-degree viewing angle. Also, the indoor version fell flat on many of its promised features. While the outdoor camera uses different hardware, the indoor experience left me feeling leery towards Oco’s ability to build a quality camera.
I recently purchased the new Ring security system after owning the video doorbell for a while. I bought this system to allow me to ditch my system and service from a large national provider (42$ per month for monitoring vs 10$)! Firstly, I have been interested in this product and company since I saw Jaime Siminoff on Shark Tank back in 2013. Back then the company was called DoorBot. I like the new name much better.
It would have been convenient to have a device like a key fob for the Ring Alarm, as running to find the keypad or navigating the app to turn off the alarm takes a few seconds too long, but one does not currently exist. However, arming and disarming the system is relatively straightforward.  I just had to dig through the paper manual to figure out how to correctly enter my PIN to change modes.
Unfortunately, though I purchased the Solar Panel version, the camera did not ship with Solar Panel installation instructions. The Solar Panel itself had an instruction pamphlet, but it’s picture book style, which is not my favorite. I decided to ignore all instructions and guess at the install, which wasn’t a good idea. After installation, the camera’s video feed kept flickering in and out (a problem which I have yet to resolve) so I went back through my install steps to see if I had messed up along the way. I had. I found Solar Panel installation instructions online which I recommend and followed step-by-step.

Ha! That’s funny. Anywho, Arlo. Yes, Arlo needs the base station. The cameras only talk to the base station which creates its own network. The max range is stated at 300ft between base station and camera, which I assume is direct line of sight. If I had to guesstimate the distance between my base station and camera I would say 50 feet max? I haven’t tested beyond that.
Ring also doesn't currently offer any additional security accessories, but it plans to add a leak sensor and other devices at some point. And while your Ring security cameras and video doorbells ($250 at Amazon) live in the same app as your Ring Alarm Security Kit, there aren't any direct integrations between them today. I'd like to see something like, "If the Ring Alarm Security Kit's front door sensor notices that the door is opened in Home or Away mode, then tell my Ring Video Doorbell Pro to record automatically" -- even if the Video Doorbell Pro itself hasn't detected motion yet. 
Arlo Pro is preprogrammed with four modes: Armed, Disarmed, Schedule, and Geofencing. Most of the modes are customizable, and you have the option of adding your own customized mode. You can even create different rules for different cameras. For example, armed mode on camera A might mean that if it detects motion or audio, it will record, while armed mode on camera B might mean that if motion is detected, it sounds the siren, but doesn’t record. You can also decide if you would like push alerts, email alerts, or no alerts.
The first step of installation involves simply plugging in the base station and hitting a pairing button on the back to start configuring the system via Bluetooth. The Ring app, which is getting a significant redesign to provide quick access to Ring Alarm and improve functionality for other Ring products, walks you through the entire setup process step-by-step, so it's hard to mess things up. Once the base station starts up, you can connect to your home network via either Wi-Fi or Ethernet, and I elected to use Wi-Fi to minimize wires.
I’ve only tested one cloud-less camera this year (Reolink Argus) and it’s battery-powered. And if you’re asking about systems like Amcrest and Swann, I don’t have anything similar. I mainly focus on cloud cameras for now, but who knows what the future holds! Currently, I’m working on an updated indoor camera version of this article, but all the cameras I’m testing use cloud storage.
While other smart security systems let you arm the alarm through key fobs, unfortunately, the Ring Alarm system does not have this capability at this time. Using a fob makes things quicker and easier than opening an app or punching in a code; however, Ring does have plans to make its system compatible with Alexa in the future, so that will make things a little easier.
I tested the Spotlight Cam Wired and the Spotlight Cam Solar separately. The Wired is a great option if you have easily accessible outdoor power outlets. The 4.96-inch-by-2.72-inch-by-2.99-inch camera has a 20-foot power cable attached at the back as well as a built-in wall mount, and unlike with the battery powered models, you won’t have to worry about dead batteries or too many overcast days interrupting your surveillance. I’m guessing, however, most folks will need one of the battery-powered cameras.
So, is the Ring Alarm for you? If you're looking for a DIY alarm system that provides external monitoring and doesn't cost a fortune, I'd have to say that this is the option to consider. There is no shortage of great options out there from companies like Nest, SimpliSafe, and more, but they all come in much more expensive than this. At under $200 for the base package, it's really hard to beat what Ring is offering here.

Multi-Camera Discount Price Includes Shared Storage for 10 Cameras (Free Plan Supports 5.) Price Includes Shared Storage for 10 Cameras (Free Plan Supports 5.) $10/month or $100/year for Unlimited Ring Cameras $10/month or $100/year for Unlimited Ring Cameras Each Additional Camera Costs $2.50/month or $25/year Price Includes Shared Storage for 5 Cameras (Free Plan Supports 4)


Both the Ring Alarm and Nest Secure are easy to install by yourself. You don’t need to purchase professional installation, but both offer that option for an additional charge. Neither platform requires a contract, so you won’t be forced to pay monthly ongoing subscription fees. Both Ring and Nest also offer the ability to control your home security devices via a user-friendly app on your smartphone or tablet, making it simple to check in on things at home when you’re out and about. You’ll also get a notification on your device if the system detects anything out of the ordinary, so you’re always in the know about what’s going on at home.
During my extensive research for a cost-effective security solution in 2017 I compared various offerings from different vendors. The Ring was one of the 3 that made my list.Once Ring ceased sales because of a lawsuit, I decided to wait instead of deciding on the other 2 home security solutions because Ring was the cheaper of the 3. I waited and pre-ordered soon as I got the long awaited email and I'm glad I did because it is worth it! The setup up was simple and I was up and running within minutes. Placing the sensors is key and the provided adhesives make the installation quick, if you do not want to use the mounting screws. The modes are helpful (Unarmed, Home and Away). Even if your system is on the 'Unarmed' mode, you still continue to receive alerts in the Ring App on activity from the Motion and Door/Window Sensors. I added an extra range extender which was very easy to add and took less than a minute to be adopted into my system. The range of the devices quiet well, I'm getting coverage for a 1200 square foot area just without the extender. The sensors light up when it senses activity and a ping is heard on the base station. You can adjust the volume for the base station so it is not too loud. Highly recommend this because it is user-friendly, and the sensors work great. Ring support is always there to assist if you need help.
1. Nest can record continiously which eliminates the problem of sleepy security cameras. As far as Ring cameras, Ring Pro offers a pre-buffer. As far as their other cameras, I’ve only tried Ring Spotlight wireless. It’s a battery-powered camera and does not pre-buffer. I believe I heard that the wired version does pre-buffer, but I haven’t personally tried it.
On the downside there is no way to enable/disable video motion detection clips in sync with the armed status. I only want certain cameras to record when armed stay or away. They really need the option to tell the cameras when to record and when not to record. Other than that the 2-way camera communication is spotty at best, but not really a feature that’s important to me. Adding live video to the online access would be a BIG plus too (currently you can only access the cameras through the app).
With home and away modes, you're able to customize entry and exit delays up to two minutes before the alarm goes off, giving you enough time to leave the house after arming and enter the access code on the keypad upon returning home. When an event is detected, you'll get a notification on your phone, and the Ring app will display a countdown giving you the configured period of time to disarm the system before the alarm goes off. If you fail to enter the keypad code or disarm from the Ring app within the allowed time, the base station will emit a very loud beeping sound, and if you are signed up for professional monitoring, authorities will be notified.
You can set motion zones for the lights, too. In this case, the app shows a graphic representation off the motion sensor’s 270-degree range, and you can define where you want movement to turn on the lights by tapping up to three preset zones and then expanding or reducing coverage in those zones using a slider. Depending on your settings, the light will stay on for one to 15 minutes.
The Spotlight Cam employs the common method of using bounding boxes over the camera image to define detection zones, but you can use the box handles to twist it into any kind of geometric shape, not just squares. That allows you to work around outdoor areas where you don’t have as much control over the environment as you do inside your home. There’s also a scheduling option to disable motion alerts during certain times of day.

Check out this video at second 0:19 vs. 1:13 https://www.youtube.com/watch?v=YdM9HV1PoUs&lc=UgzO67pS8VXEX-xurdh4AaABAg. I took this video in January and compared the indoor Nest Cam to Arlo Q, which would be similar to Nest Outdoor and Arlo Pro 2. All-in-all Nest is better, especially at night (skip to minute 1:46 and 2:11). Nest also performs better in mixed lighting environments.
Contact sensors come in two pieces, a large sensor part and a smaller magnet part, and both pieces must be aligned within 1/4 inch of each other when the door or window is closed. One piece goes on the door or window while the second part goes on the frame, but it doesn't matter which part goes on which side. When the door or window is opened, the two parts are separated, and the sensor triggers.
And that is its job, to keep the camera charged. However, I noticed during testing that it does charge the battery too. When I installed the camera, the battery level was at 40%. Soon after connecting the solar panel, that percentage jumped to 50%. The next day it rained, and the percentage climbed from 50 to 52%. Day three was overcast, and yet the battery level crept up to 56%. Day 4 was a beautiful sunny day, and the battery level jumped to 78%. By the end of day 4, I was at 100%.
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
The spotlight is provided by LED light strips on either side of a 140-degree wide-angle lens, which activate when motion is detected. The motion sensor, encased in a dome on the bottom of the camera, has a 270-degree detection range. The camera streams and records video in up to 1080p resolution and supports two-way talk with noise cancellation and night vision up to 30 feet.
Ring is a Wi-Fi connected doorbell and exterior lighting security system that was recently purchased by Amazon. They don’t offer any type of home automation features; however, their system is compatible with many third-party smart home systems. However, Ring has announced that they will soon be adding interior home security and environmental protection features to their current lineup.

What sets Nest Guard apart from the abode and Ring’s base station is its intuitive nature. First of all, the integrated keypad is a smart choice because let’s face it; phones get lost. In addition to a keypad which accepts a numeric passcode, Guard has several buttons. You can press a button to quickly swap between modes (alarm off, home and guarding, and away and guarding) or you can press for immediate help using the panic button which is found on the back of the device.


That all changed when smart home technologies and devices came into play. The landscape of how home security systems behave and how they are used continues to evolve. For instance, you no longer need the help of a professional installer, as most smart home security systems are easy to set up and monitor. Most can be fully functional in a matter of minutes.
Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home. You won’t be locked into any long-term contracts. You don’t need professional installation. You don’t even need any tools. It’s that simple.
×