Once these motion-activated cameras pick up on movement, they’ll turn on their built-in floodlights, start recording, and send an alert to your connected mobile app. From there, you’ll be able to see and hear what’s going on via the camera feed, as well as speak through the cameras to whoever is on the property. You can also customize alert zones to narrow in on the most important areas for motion detection. All of this can be done from anywhere, which means you can keep an eye on your home even while you’re away.
Ring Alarm doesn’t support smart lighting controls, door locks, thermostats, garage-door openers, or other common smart home products today, and there’s a very short list of supported third-party products. But it lacks nothing needed to support those and similar devices down the road. And in an interview with Ring Solutions president Mike Harris earlier this week, I learned that’s exactly what Ring intends to do.
The other thing of note is its lack of smart home partners. Despite being owned by Amazon, Ring's system doesn't work with Alexa or any other major smart home platforms. If you want to arm and otherwise get the status of your home security system via voice commands, the Ring Alarm Security Kit isn't the right option for you. Ring does specify in its support section that it's working on these integrations for a future release.
The Z-Wave range extender and the sensors in the kit are pre-paired with the base station, so you just need to enroll them into the app. Ring also sent me a couple of add-on door/window sensors so I could experience the full onboarding process. This simply involves scanning a QR code on the device, verifying that the PIN printed below the QR code matches what’s displayed in the app, and then pulling the battery tab.
You set up the Chime Pro, which also adds a chime sound to your motion detection alerts, in a process that’s similar to the camera installation: You plug it in to an AC outlet somewhere between your router and the camera to repeat the wireless signal. I used a spare outlet in my kitchen as that was roughly the halfway point between my living room router and the camera on the front of my house. Once the Chime Pro is plugged in, a voice prompt will tell you it’s ready to set up. You then add the device in the Ring app then follow the voice and app prompts to connect it to your wireless network.
There are many great brands out there that make it easy for you to find the security products that fit your unique needs. Two such options are the Ring and Nest systems. These popular brands have developed a range of products to help you easily build and customize your home security ecosystem. In order to help you choose the right system for you, we’ve broken down the pros and cons of each. Here’s a quick rundown of the main features you should keep in mind when deciding between the two:
Ring Neighborhoods is a service that lets you share videos with other nearby Ring users or anyone who has downloaded the Ring app. The service ties into another feature called Ring Locations. Ring Locations allows you to attribute your different Ring devices to different locations and customize user access for the same. For example, you might have your Ring Doorbell at one location where your kids have Homeowner user status, while you have Ring Alarm at another location and limit their access to Neighbor.
Great article with lots of useful information. Very comprehensive comparison that really helps people make a wise decision based on their particular needs. FYI, I chose abode for my home security needs because it’s a proven shipping product and it integrates well with other systems. Although the camera quality might not be as good as others, it will suffice for my needs.
One major issue that I have is that I don't believe there is a duress code for this system. A duress code will disarm the system but also secretly send a notification that there is a problem to the monitoring company, who will send the police. The Ring system has a way of doing this that would make it obvious to an intruder that you're letting the police know there is a problem. The panel has two buttons with red dots on them. By pressing both buttons at the same time, the system will notify the Ring monitoring center that you need assistance. The problem is that the intruder will definitely see you do this instead of entering your code to disarm the panel. I can see where this may upset the intruder. I feel like Ring needs to step up and add a duress code feature so that you can be discreet about needing help.
The safety and survival of your family will The safety and survival of your family will be your main concern in the event of a disaster. This carefully-stocked emergency kit contains packaged food and water to sustain a family of four for the critical first 72 hours of an emergency situation as well as water purification tablets a ... More + Product Details Close
The keypad measures 0.91 by 5.87 by 3.94 inches (HWD) and has numeric keypad buttons (0-9). It also has an X button and a button with a check mark on it: pressing and holding both of these buttons puts the system into Panic mode, which sounds the siren and sends an alert to the professional monitoring service so that police can be dispatched. To the right of the numeric keypad is a round dial with three buttons for putting the system in Home, Away, and Disarm mode, but you'll first have to enter your unique access code. Other LEDs include network and battery indicators, and a faulted sensor LED that tells you if a sensor is open before you arm the system.
After I finished installing this device I found myself having issues with it for the first 3 days where sensors will go offline for no reason almost every day; suddenly after day 4 maybe, all of the issues disappeared and the system was now working like a well-oiled machine. I reached out to Ring support team and they informed me that there was an automatic update that the brain device was going to perform on its own and that would solve all of the issues I was experiencing. They were indeed 100% correct, after just a few days the system was doing exactly what it was supposed to be doing all along. No issues, no dropped devices, a happy customer here now. If you end up choosing this system and experience issues during the first 3-4 days, please wait a few days for your system to automatically update itself to the latest software and you’ll see the issues magically go away.
As is the case with the Nest Secure system, the Ring Alarm does not support IFTTT applets or react to Amazon Alexa or Google Assistant voice commands. A Ring spokesperson has confirmed that support for voice commands and many other third-party devices is in the pipeline, and will include support for the soon-to-be-released new Ring Stick Up Cam, as well interoperability with other Ring devices.
Third, Nest Guard has a voice. Of course, it’s no Google Home, but it will provide useful information. For example, when you arm your system, there is an arm delay which allows you to exit your home without setting off the alarm. Instead of an annoying beep that continues until the system arms, Nest Guard uses a friendly voice to tell you how much time you have left.
I’ve enjoyed reading your summaries for over a year. I initially had my mind set on Abode after removing iSmartAlarm and SimpliSafe (previous generation) from consideration. I had an Abode package all set and nearly pulled the trigger on a purchase. However, after coming across Ring and reading your review multiple times, I ultimately went with Ring. What won me over was the package being offered by Costco that has six door/window sensors. When I priced out what Abode would cost to have comparable coverage, Ring clearly won out. I don’t need any integrations or automation, thus I don’t feel I’m losing out on those aspects by selecting Ring over Abode.
The Ring Alarm starter kit is one of the most affordable security systems available. For $200, you get a wireless base station, a keypad for arming and disarming the system, one entry sensor, one motion sensor and a Z-wave range extender. I would have liked the kit to include at least two entry sensors since there's typically more than one point of entry to every dwelling, but you can purchase additional entry sensors for $20 a piece.
Where abode Wins: abode offers free cloud storage, and they offer the widest range of equipment including glass break and flood sensors which are viewed as essential home security devices. Also, abode uses an open platform allowing more third-party integrations via Z-Wave and Zigbee backed by their CUE automation engine. It’s true that Ring offers Z-Wave and Zigbee too, but details on compatible products are still scarce. Fourth, abode has more home security experience than Nest and Ring.
Enjoy a free 30-day trial of Ring Protect Plus with your purchase! Ring Protect Plus lets you record, save and share all the videos captured by unlimited Ring Doorbells and Cameras at your home. Protect Plus members also get 24/7 professional monitoring with Ring Alarm, exclusive discounts and extended warranties. Activate Ring Protect Plus for only $10 a month, or get video recording and sharing for only $3 a month per each device with Ring Protect Basic.