Ring’s motion sensors and contact sensors are much more traditional than Nest’s, which cleverly combine the two into a single device that also adds a nightlight. Nest’s base station also combines the keypad with it and adds even more motion detection sensors – Ring’s separate base station and keypad approach is almost clumsy in comparison. But it is possible to add multiple keypads to the Ring system, so you can have one at each entry way or in your bedroom if that’s a more convenient place for it. The keypad can be placed flat on a table or mounted to the wall, and uses a simple MicroUSB cable for power. Its internal battery lasts between six and twelve months, according to Ring, so it’s possible to install it in a location that doesn’t have an accessible power outlet and just charge it occasionally.
I don’t think I mentioned the answer in this article, but I know I’ve talked about this elsewhere. Unfortunately, all I can remember is abode and Ring. I can’t remember anything about Nest. All abode devices and sensors use the abode RF encrypted protocol to talk to the gateway. They also encrypt all communication between the gateway and the cloud. Ring uses Z-Wave Security 2 and Z-Wave SmartStart technology which encrypts the signal between the base and cloud as well as the base and sensors.
Hi Rose, thanks for the reviews. I am about to send a Vivint system back due to the doorbell camera. It does not capture motion events. I am curious as to why you did not review them (or the camera). They are complaining about my upload speed of my WiFi, which makes me ask, where are the motion detection algorithms processed? Are they run on the doorbell, the panel or only after it is uploaded? Did you look into that?
The next step is camera placement, and Arlo Pro offers a few options. It can sit on a flat surface, stick directly to a metal surface (magnetic), or you can use the included plate to mount it to a wall. While you can place Arlo inside or out, the camera’s power cord that ships with the package is not weatherproof so plan to use battery power when placing the camera outside. If you’re willing to spend an extra $25, you can also buy the weather-resistant outdoor power adapter (VMA4900) that works with Arlo Pro, Arlo Pro 2, and Arlo Go. Finally, they also sell an $80 solar panel. The panel works with Arlo Pro, Pro 2, and Go, and can power one camera continuously. Keep in mind, however, that the solar panel only powers the camera. It does not charge the camera’s battery.
New, unopened Ring Spotlight Cam wired uses motion sensing to detect intruders! Plug it in, and then it picks up movement, the spotlight turns on, and it begins recording in 1080p with infrared night vision and two-way audio. It connects to WiFi, allowing u to monitor surveillance straight from your phone! It also contains an alarm that u can activate if needed. It is weather resistant and the perfect device to keep your home safe!
EverCam is a newer option made by a Chinese company who has never made a security camera before. That said, despite their Kickstarter success, I’m hesitant to recommend the camera even though it boasts an impressive feature list. For one, they refused to answer my in-depth questions about the camera which makes me a little suspicious. Two, they are promising many AI-rich features without a monthly fee. As a consumer, I know that’s tempting, but I also know it’s unsustainable. Facial recognition, for example, does not live on the camera itself. The feature is cloud-based which is expensive to maintain; hence why you see companies like Nest charge a fee to access features that are heavy on AI.
The Spotlight Cam captures video at 1080p and has a 140-degree field of view, but lacks the pre-buffered recording capabilities that you get with Netgear's Arlo Pro 2 camera and the Ring Video Doorbell Pro. It uses four infrared LEDS to provide up to 30 feet of night vision and has a built-in 110dB siren, an 802.11n Wi-Fi radio, and a speaker and microphone for two-way audio. The spotlight itself consists of two strips on either side of the camera, each with four LEDs that provide an overall brightness of 700 lumens with a 4,000K color temperature. The camera comes with one battery pack, a mounting bracket, wall screws and anchors, a screwdriver and drill bit, and a setup guide.
Both systems offer exceptional protection and support, so the choice really comes down to your unique needs. For someone who wants their home to be fully automated and for their devices to talk to one another, Nest is the easy choice. While more expensive, the system offers excellent connectivity and added products like the Nest Tags and connected lock.
Quiet Open allows you to bypass an armed sensor simply by touching it. For example, if your system is armed, but you want to check the weather outside, you can press the sensor, and open your door. While I’ve heard only praise for this feature, my initial reaction was that it seems like a security flaw. Your teenagers, for example, can press the sensor and sneak out. Furthermore, there is no identification tied to using the feature. For example, it won’t say, “Rose bypassed the sensor.” Fortunately, you can turn this feature off if you’re concerned.
Although this looks intriguing, my experience with Ring products is that they work about 75% of the time on our two cameras. And the problems are definitely with Ring, not our network - as sometimes our iPhone / iPad won't connect, but an Android device right next to it on the same network will connect just fine to the video. Occasionally it is the other way around, but sometimes nothing will connect to the Ring camera even though my home network is up and working fine. That's annoying for video alerts... but for a home alarm, I don't think I would trust them based on my experience with our Ring cameras.
Nest will intelligently alert you, within reason. For example, you can have the street set as a zone, but turn off notifications for the street. Nest can also tell you when it sees a person or thinks it sees a person. In fact, you can choose to only receive alerts when it sees a person, which virtually eliminates false alarms. Better still, you can turn on person detection for the entire frame or from select activity zones.
The other major part of the Ring Alarm kit is the 5.9 x 3.9 x 0.9-inch keypad, which can also be laid flat or hung on the wall. The keypad has 12 backlit number buttons, as well as three other buttons for quickly arming and disarming the system (though it's also possible to do so from the Ring app for iOS and Android). The buttons are plastic and easy to clean, and by default, they chime when pressed. I like that the keypad is handheld, but I still much prefer the rubberized remote keypad offered by SimpliSafe.
The Ring mobile app recently got a facelift that gives it a more polished Dashboard featuring live preview windows. The Alarm controls are at the top of the Dashboard screen and include Disarmed, Home, and Away buttons. Below the buttons is the status of all installed sensors (cleared, open), and below that are tabs for viewing Neighbors posts and Event History.
Rose first let me say thanks for the reviews. But just wanted to let you know (and maybe the nest guy you talked with also) that you can choose to only get notifications for people and not motion. This has been available for at least 3 months now. Also have only had one time when it had reported a person and was not. Car lights was what it really saw.
You can place the keypad on a flat surface like a table or shelf, or you can mount it on the wall. Just remember that it needs a Micro USB cable for power, but that doesn’t mean it needs to be placed close to an outlet. Ring says its internal battery will last six to twelve months depending on usage. As a result, you could potentially place the keypad anywhere in your home and charge it every so often.
The Z-Wave range extender and the sensors in the kit are pre-paired with the base station, so you just need to enroll them into the app. Ring also sent me a couple of add-on door/window sensors so I could experience the full onboarding process. This simply involves scanning a QR code on the device, verifying that the PIN printed below the QR code matches what’s displayed in the app, and then pulling the battery tab.
4) keypad- the nest system is if you dont have a table to lay the base station on as you come in the door. If you have a modern hosue or modern design you will prefer the flexibility to mount the keypad on the wall AND (VIP) use multiple keypads if you choose to enter through more than one door ! Nest allows for openly one keypad ! And also by putting kepayp[ad and base station in one chassis, you can't hide the base station OR locate it wher the mesh networks eorks best ! I understand nest keypad is a work of minimalist art.but Ring keypad is hardly ugly and very functional and flexible . It even lights up as you approach it and can be operated on batteries as well (ie you can take it with you to other parts of the house as needed !)